Team Orion advantage ONE 604 Mode D'emploi page 15

When certain issues are detected, error messages are displayed on the LCD screen. Refer to the table below for more
information.
NOTE: different types of defects can cause the same error message, we cannot guarantee that the charger's indications
and the proposed solutions are always appropriate.
ON SCREEN MESSAGE
POWER SUPPLY HIGH VOLTAGE
POWER SUPPLY LOW VOLTAGE
NO BATTERY CONNECTED
BATTERY CELL ERROR
BATTERY POLARITY INVERSION
DEFECTIVE BATTERY
BALANCE ERROR
BATTERY VOLTAGE TOO HIGH
BATTERY VOLTAGE TOO LOW
CHECK BATTERY CONNECTION
BATTERY TYPE ERROR
www.teamorion.com
TROUBLESHOOTING
MEANING / SOLUTION
Input voltage too high. Check external power supply voltage.
Integrated power supply defective
Input voltage too low. Check external power supply voltage.
Integrated power supply defective
Check battery and connections
Check battery and cell number setting
Check battery connections and polarity
Defective battery, cell unbalance 0.5V or more
No balancing connector detected or balancing polarity/connection problem
Battery voltage higher than safety threshold. Check battery and/or settings
Battery voltage lower than safety threshold. Check battery and/or settings
Check battery and connections
NiMH/NiCd battery type selected but a LiPo/LiFe battery with balancing
connector is connected to the charger. Check battery and/or settings
English - 15