Team Orion advantage ONE 604 Mode D'emploi page 13

Charging LiPo/LiFe batteries
WARNING! LiPo/LiFe batteries must be equipped
a
with two connectors, one for charging and one for
balancing! Never charge a LiPo/LiFe battery without
connecting its balancing connector to the correct
balancing port on the charger! Never use NiMH/
NiCd mode to charge a LiPo/LiFe battery, this will
likely cause the battery to overcharge, fail and risk
causing fire, property damage and personal injury.
CHARGING LIPO/LIFE BATTERIES WITHOUT
a
BALANCING IS NOT POSSIBLE.
Balancing: The charger's integrated balancing
ports use JST-XH type connectors. If your battery
uses another type of connector, you will have to
purchase compatible balancing adapters separately.
LiPo/LiFe batteries use different balance connector sizes
depending on the number of cells inside them; make
sure that you are connecting the balancing connector
into the correct balance port on the charger. Thanks to
the balancing function, the charger can measure the
individual cells voltage and adapt the charge process
accordingly. Depending on the cells unbalance and battery
state, the charge will take more or less time to complete.
www.teamorion.com
Procedure LiPo/LiFe
 Select memory profile 1 to 5, CHG mode and adjust
the charge settings if necessary.
 Connect the battery to the charger using the
charge lead.
 Connect the battery balancing plug to the correct
balancing port on the charger.
 Press the ENTER/STOP key to start the charge.
 Once the charge is completed, press the ENTER/
STOP key to display the final charge data.
 Press the ENTER/STOP key again to return to the
main screen.
 Disconnect the battery.
English - 13