5.2
Fan Body and
Cone
(only full set)
Fig. 19: Cone of the Fan Body
Fig. 20: Battery case of the Fan Body
Use the Cone to create a narrow fog stream that
makes the air stream clearly visible (see fig. 1,
part 2).
NOTE!
Cut the Cone Tube with an utility knife for a larger
opening (0.5 to 1 cm).
Open the battery case of the Fan Body with a
screw-driver and install a standard battery
1,5 V LR6.
ATTENTION!
Make sure the polarity is correct. The correct po-
larity is shown in the battery case. To see the po-
larity symbols better, open the battery case and
put the Fan Body on a dark background.
Operation
EN
29