Getting started
4
Getting started
4.1
Installing the batteries
Fig. 13: Battery case of the
Fog Spray Gun
Fig. 14: Battery case, opened,
with batteries
26
Open the battery case with a screwdriver. The
battery case is at the bottom side of the Fog
Spray Gun.
Install 6 standard batteries LR6, 1.5 V, alcali-
ne.
ATTENTION!
Do not mix old and new batteries and always
change 6 batteries at the same time.
Always put two batteries in one case, one on
top of the other.
ATTENTION!
Make sure the polarity is correct. The correct po-
larity is shown in the battery lid.
Close the battery lid and tighten the crosshead
screws.
NOTE!
Instead of the cells, rechargeable batteries can be
used.