Changing The Frequency Of The Camera - Luda Elektronik cowCam 905T Guide D'utilisation

14. Changing the frequency of the camera

If you believe that interferences in the picture are not a result of unnecessary obstacles between the
transmitting A300-antenna (10dBi) and the receiving A300-antenna (10dBi) it is advised to change
the camera frequency. The included camera in the cowCam™-solution can be changed to any of the
four radio frequencies to avoid possible interferences. Kindly view below illustrations to learn how the
respective frequency can be set.
1. Slide the camera hood forward
2. Rotate the camera objective counter clock-wise.
3. Change the dip switches in accordance with the illustration.
NOTICE!
By changing the camera frequency you change the transmitting channel of the camera. If you
do this you also need to change the channel of the receiving part of the videoLink.
The transmitting channel of the camera and the channel of the receiving part of the videoLink
should always be the same.
Channel 1
2414MHz
Channel 2
2432MHz
Channel 3
2450MHz
Channel 4
2468MHz
- 53 -
DE
EN
FI
FR
SV