Troubleshooting The Barn Supervision - Luda Elektronik cowCam 905T Guide D'utilisation

13. Troubleshooting the barn supervision

The purpose of this chapter is to systematically go through all possible errors that might
have occurred during the installation. Follow the scheme below to locate the problem in your
installation.
Troubleshooting the LCD-monitor
The LCD-monitor is considered working if an unstable or noisy black and white picture is shown
when it is switched on. If it is working, please move on to troubleshooting of the camera below.
?
No picture at all (black)
Possible errors
• The LCD-monitor is not switched on.
• You have not used the correct power
adaptor.
• The battery is not charged.
• The battery is permanently discharged.
• The LCD-monitor is only working when
connected to its power adaptor.
No picture (black & white interference)
Possible errors
• The camera is not switched on or does
not transmit.
? ?
Action
• Switch the LCD-monitor on.
• Connect the correct adaptor (5V).
• Charge the battery.
• Change to the other included battery.
• You have most probably used another power
source than the intended. Please contact LUDA.
Action
• Troubleshoot the camera (see next step).
- 47 -
? ?
DE
EN
FI
FR
SV