Water Connection - Weka SR 25 Notice D'utilisation

6.2

Water connection

If water escapes from the overflow hole on the water connection ring (item 505), the rotary shaft seals
are to be replaced immediately. This should only be done in an authorized specialist workshop.
7. G U A R A N T E E
We will guarantee the WEKA core drilling machine for 12 months from the day of delivery. During this
period we will rectify material and production defects free of charge. This warranty does not cover normal
wear and tear, overloading, non-compliance with the operating instructions and intervention by
unauthorized persons or the use of parts from other companies. Further more wearing parts as rotary
shaft seals, overload clutch and ON-OFF button are not covered by warranty.
8. D E C L A R A T I O N O F C O N F O R M I T Y
Description:
Type:
from serial no.:
We hereby declare under our sole responsibility that this product conforms with the following standards:
EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, EN60204-1 (SR65/68/75), EN61029-1 (SR25/38,
where leakage current is
2006/42/EG, 2011/65/EU and 2004/108/EG.
WEKA Elektrowerkzeuge
Auf der Höhe 20
D 75387 Neubulach
9. R E C Y C L I N G
According to the European regulation 2002/96/EG we have to take back old machines for
departing them by substance and for recycling. Please make sure that the old tool does not
get into the unsorted municipal solid waste, but that they are given back to us, resp. abroad
to our distributors.
Diamond core drill - for drilling holes in concrete, stone and masonry
SR25, SR38, SR65, SR68, SR75 (and versions)
0113001
2 mA), EN61029-2-6 (SR25/38) in accordance to the regulations of directive
Übersetzung der Originalbetriebsanleitung - Subject to change without notice 0313
Neubulach, 28.12.2012
Wilhelm Wurster, Owner
18