Linea 2000 DOMO DO989BFK Mode D'emploi page 35

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
3.
Now loosen the lower hinge. Remove the screws and the hinge itself. Loosen the adjusting foot on
the other side. Switch these around. Fasten the hinge with the screws on the left and the foot on the
right.
4.
There is a doorstop at the bottom of the lower door. Move it to the other side. There is a Teflon
bushing to guide the hinge at the top of this door. Move it to the other side as well.
5.
Carefully put the lower door in place. Install the middle hinge. Make sure that the door is aligned
both horizontally and vertically so that the seals are closed on all sides before fully attaching the
middle hinge. Put the screw hole cover caps on the other side.
6.
There is a doorstop at the bottom right of the upper door. Remove this and keep it for later use. Take
a new doorstop from the accessory bag and attach it to the bottom left side of the door.
7.
Carefully put the upper door in place. Install the upper hinge. Make sure that the door is aligned both
horizontally and vertically so that the seals are closed on all sides before fully attaching the hinge.
Replace the hinge cover plates.
www.domo-elektro.be
35
DO989BFK

Publicité

Table des Matières
loading

Table des Matières