Customer Service - Zwilling ENFINIGY Mode D'emploi

Fault / Customer Service / Disposal
Problem
All program symbols on the
blender base are flashing
and three beeps sound.
It is not possible to start
the mixing process.

Customer service

Please contact our customer service should you encounter any problems with your blender.
Detailed information on service, repairs, warranty and product registration can be found at
www.zwilling.com/service.
Disposal
With regard to disposal, please return your old appliance to a collection point for electrical
appliances.
28
Possible cause
The blender bowl and the lid
have been removed during
operation.
The motor has overheated.
The blender bowl or the lid is
not attached correctly.
The blender has been stopped
and the selector switch has
been moved with the lid open.
Remedy
Reattach the blender bowl or lid
and continue as desired.
Put the selector switch in the on/
off position, unplug the appliance
and wait 30 minutes.
Place the blender bowl on the
base with the handle facing to
the right or front or attach the lid
correctly.
Put the selector switch in the on/
off position, press the power
button and then switch the appli-
ance back on.
GB