Velleman CAMCOLVC15 Mode D'emploi page 4

5. Overview
Refer to the illustrations on page 2 of this manual.
1 SD/MMC card slot
2 status LED
3 microphone
4 REC/SNAP button
5 MENU button
6 ON/OFF button
7 2.5" LCD
8 DOWN button
6. Use
Refer to the illustrations on page 2 of this manual.
SD/MMC card
• Insert an SD/MMC card (not included) into the card slot [1]. Make sure the card
is not full or locked.
Power supply
• The device has an internal Li-Ion battery that can be charged either via a
powered USB port (USB cable included) or via the cigar lighter plug from the
vehicle (adaptor cable included).
USB
o Plug one end of the USB cable into the USB port [11]; plug the other end into
a powered USB port. The status LED [2] turns on red + blue.
o The device is recognized as an additional storage media.
Car adaptor
o Plug one end of the car adaptor into the 5Vdc input [12] and plug the other
end into a 12V/24V cigar lighter socket. As soon as the car is started the
CAMCOLVC15 switches on and starts recording. The status LED [2] turns on
red + blue.
Mounting
• Screw the suction cup on the mounting hole [16] on top of the camera.
• Place the suction cup on the window and push down the handle to secure it.
Recording mode
• The camera starts recording automatically when it is switched on.
• To switch on the camera, press and hold the ON/OFF button [6] for ±3s. The
status LED [2] flashes blue and the display shows
mode.
• To stop recording, press the REC/SNAP button [4]. The status LED [2] is now
on.
Note: when connected to the cigar lighter socket, the camera stops recording
automatically when the car power is switched off.
Snapshot mode
• Press the MODE button [10] to select snapshot mode
turns blue.
• Press the REC/SNAP button [4] to take a snapshot.
Preview/playback mode
• Press the MODE button [10] to select playback mode
turns blue.
• Use the UP [9] and DOWN [8] buttons to scroll through the available
recordings.
Note: for video files the duration is indicated.
14/07/2011
CAMCOLVC15
9 UP button
10 MODE button
11 USB port
12 5Vdc input
13 camera
14 speaker
15 reset button
16 mounting hole
4
to indicate recording
; the status LED [2]
; the status LED [2]
©Velleman nv