CONTINENTAL EDISON CEBDSD40W1018B3 Guide D'utilisation page 34

b. Hang the sound bar on the wall
If your TV is hang on the wall, you can mount the sound bar on the wall below the screen.
1. The wall mount brackets are included and directly mounted on the rear panel.
2. Measure the size on both sides of the wall mount brackets and mark two points on the wall for
drilling based on the measurement.
Make sure the holes on the wall (concrete) are in proper positions before drilling.
3. After drilling, fix the screws in the holes with dowels. The screws must enough overtake for
mouting.
4. Align the holes in the wall mount brackets with the screws, and then firmly connect the sound
bar to the two screws. Connect the necessary cables before attaching it to the wall.
Note:
The wall plugs and screws are not included for mounting the sound bar.
If you are unfamiliar with power tools or placing electrical wiring in the walls of your home,
consult a professional installer.
34