Publicité
Les langues disponibles
Les langues disponibles
Electrical Connections (Figure 4.)
1.
Make the fixture connections in the arm. Insert wires
into the arm and reinstall the wire way door as shown.
(Figure 4).
2.
Secure all hanging wires to prevent interference, while
closing the door. You will hear two audible "clicks"
when the two button latches are properly engaged.
Installation Instructions - ICS/ICM Icon Site
Wireway Door
Linear Arm
Figure 4.
COOPER LIGHTING SOLUTIONS
Wireway Door
Upsweep Arm
IB500007EN
Installation instructions
3
Publicité
