Unpacking And Verification Of The Content; Prior Warnings - Puricom Europe ERGO 8 Guide D'utilisation

4. UNPACKING AND
VERIFICATION OF CONTENT
It is important that prior to installing
and starting the system you check the
parts to ensure that they have not been
damaged during transportation.
Any claims for
transportation must be presented along
with the delivery note or invoice to
the distributor, including the name of
the carrier, within a period of 24 hours
following the receipt of goods. All
systems are composed of the elements
below:
1. ERGO 8 and 11 water softeners.
1
2
4
2. 2m hose for the drain connection
(1/2") and 2m hose for the overflow
drain connection (5/8").
3. By-pass valve,
installation instructions.
4. I nstallation kit, including o-rings (for
the by-pass valve), clevis pin and
inlet/outlet clamping.
damages during
3
mixing valve and
The packaging
recycled and must be disposed of in the
appropriate recycling bins or a specific
centre for the collection of waste
material.
The machine that you have acquired has
been designed and manufactured with
high quality materials and components
that can be recycled and reused. This
product must not be thrown away into
the usual urban rubbish bins. When you
wish to dispose of the machine it must
be taken to a specific centre for the
collection of materials, and you must
state that it contains ion exchange resin.
In order to obtain more information
about the disposal of your equipment,
contact your local urban waste centre or
the establishment where you acquired
the system.
The proper collection and treatment
of the machines that can no longer be
used contributes to the preservation of
natural resources and also to avoiding
potential public health risks.

5. PRIOR WARNINGS

The Ergo water softener IS NOT A
WATER PURIFIER. It removes the
hardness from water, leaving softened
and treated water which will prevent all
problems associated with hard water.
Should the water to be treated not
come from a public water supply,
that is from an unknown source, a
physical-chemical and bacterial analysis
of the water shall be necessary, with the
aim of ensuring its proper purification by
applying the techniques and systems
appropriate to each case, PRIOR TO THE
INSTALLATION of the system.
Contact your distributor in order to
get advice about the most appropriate
treatment for you.
materials can be
9