Display; Starting Up The Appliance; Before Using Your New Hob; Starting-Up - Oceanic OCEATV3ZSE Notice D'utilisation

Display

Display
0
1...9
A
E
H
L

STARTING UP THE APPLIANCE

Before using your new hob

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.

Starting-up


Start-up/ switch off the hob
Action
To start
To stop

Start-up/ switch off a heating zone
Action
Zone selection
Increase power
Decrease power
Stop
If no action is made within 20 second the electronics returns in waiting position.

Residual heat indication

After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on,don't touch the heating zone and don't put any heat
sensitive object on them. There are risks of burn and fire.

Automatic cooking

All the cooking zones are equipped with an automatic "go and stop" cooking device. The
cooking zone starts at full power during a certain time, then reduces automatically its power on
the preselected level.

Start-up:
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
Designation
Zero
Power level
Heat accelerator
Error message
Residual heat
Locking
Control panel
press key [ ]
press key [ ]
Control panel
press selection key
press key [ + ]
press key [ - ]
press simultaneous [ + ] and [ - ]
or press key [ - ]
Control panel
press selection key
press key [ + ]
repress key [ + ]
press key [ - ]
23
Function
The heating zone is activated
Selection of the cooking level
Automatic cooking
Electronic failure
The heating zone is hot
The control panel is locked
Display
3 x [ 0 ]
nothing or [ H ]
Display
display is on
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] is blinking with [A]
[ 9 ] wents to [ 8 ] [ 7 ]
[ 7 ] is blinking with [A]