Control And Display Of Faults - Oceanic OCEATI2Z2B Guide D'utilisation

The induction hob or
a cooking zone
switches off
unexpectedly, a
beep sounds and an
error code shows
(generally
alternately with one
or two figures
displayed in cooking
timer).

Control and display of faults

If an anomaly appears, the induction hob automatically enters protection mode
and displays the following protection codes:
Problem
F3/F4 Temperature sensor for an
inductor fault
F9/FA
Temperature sensor for a fault in
an IGBT module.
E1/E2 Abnormal voltage
E3 Elevated temperature of the
temperature sensor for an
inductor fault
E5 Elevated temperature of the
temperature sensor for an IGBT
module
The above concerns assessment and inspection of common faults.
Do not dismantle the appliance yourself, to prevent dangers and damage to the
induction cooking hob.
Technical fault.
Possible causes
Please note the error code in
letters and numbers, unplug
induction hob from the mains and
contact a qualified technician.
Necessary action
Please contact the supplier.
Please contact the supplier.
Check if the voltage is
normal.
Switch on once electric power
is normal.
Please contact the supplier.
Re-start when cooking hob is
cool.
21