Care And Maintenance; Troubleshooting - Beurer HA 50 Mode D'emploi

4. Bring the hearing aid up to your ear as shown. Gently
insert the Earphone into your ear canal, making sure
not to insert it too deeply. If the Earphone is not pro-
perly in place or feels uncomfortable, try a different
size Earphone Cover.
5. Slide the On/Off switch to the on (|) position. Adjust the Volume Control
to the desired level so that you can hear sounds clearly and distinctly.
NOTES
• If you hear a whistling sound while using the hearing aid, check for proper
earphone fitting. If it is not snug enough, use a different earphone cover.
• The hearing amplifier does not heal an existing hearing impairment, but it
does improve hearing and speech understanding.

6. Care and Maintenance

• Remove the battery from the device before cleaning.
• Please always treat the product with care and prevent the Earphone Cover
from becoming obstructed with foreign objects. This impairs the function
of the sound amplification.
• Clean the hearing aid and the Earphone Cover with a soft damp cloth then
wipe dry with a soft, lint-free cloth after each use. If they are very dirty,
you can also moisten the cloth with a mild soapy solution. Never use ab-
rasive, corrosive or solvent-based cleaning products.
• Only clean the device as instructed. Always keep liquids from entering
the device or accessories.
• Do not use the device until it is completely dry.
• An elongated object or brush works well to remove any ear wax stuck in
the earphone cover.
• Allow the hearing aid to dry fully after cleaning. Store the hearing aid in a
safe, dry and clean place in the storage box.

7. Troubleshooting

Problem
No sound is heard
from the hearing aid.
Sound is very weak. • Volume setting on hearing aid is too low
Possible causes
• Hearing aid is not switched on.
• Battery is not inserted correctly.
• Battery is depleted.
• Microphone is dirty.
• Hearing aid is damaged.
• Battery is almost depleted.
• Earphone cover or microphone is dirty.
• Earphone may be damaged.
• Remove the earphone cover and clean the sound
tube and earphone cover.
• Battery compartment is not closed. Close the bat-
tery compartment completely.
• Microphone is dirty.
6