USRobotics ADSL2+ Guide D'installation Rapide page 11

Connect a Wireless Device
For your wireless device to connect to the Wireless ADSL2+ Router, the
wireless adapter for the device must have settings that match those of
the router.
1. Ensure that each wireless adapter that will be connected to the
network is set to infrastructure mode.
2. Set the SSID in the wireless adapter's settings to the SSID that is
used in the router. The router uses USR9111 as its default SSID.
3. If you set wireless security on the router, ensure that the security
settings for the wireless adapter match those that you set on the
Wireless ADSL2+ Router.
For instruction in changing your adapter's wireless mode, see your
wireless adapter's documentation. If you purchased the USR5476
Wireless Starter Kit, see "Configuration" in the
User Guide
.
Make a Backup of Your New Configuration Settings
Once you have your wireless router configured with your ISP informa-
tion, USRobotics recommends you make a backup of your configura-
tion settings.
Select TOOLS > Configuration Tools.
1.
2. Select Backup router configuration and click Next.
3. Your system will prompt you to save the file. Select Save.
4. Browse to the location at which you want the backup file saved
and click Save.
USR5423 USB Adapter
English
7