Cd/Usb Device/Audio File/External Disc Control Features; Playing Cd & Audio File - Kenwood KDC-X590 Mode D'emploi

CD/USB device/Audio file/External disc control features

Release button
Playing CD & Audio file
When there is no disc inserted
1
Drop open the faceplate
Press the Release button.
2
Insert a disc.
3
Push the faceplate on the left side, and return
it to its former position.
• When the faceplate has been dropped open, it might
interfere with the shift lever or other vehicle function.
If this happens, pay attention to safety and move the
shift lever or take an appropriate action to remove the
obstacle, then operate the unit.
• Do not use the unit with the faceplate in the open
condition. If it's used in the open position dust can
enter the inside part and cause damage.
• When a disc is inserted, the "IN" indicator is ON.
• You can cancel the announcement when selecting
the folder by <Voice Index> (page 33) during the play
of the ACDrive media. (KDC-X590/MP632U only)
S.MODE
Track number
IN indicator
SCAN RDM/3/ REP F.SEL
A.RDM
Play time
Play mode Disc number
When a disc is inserted
Press the [SRC] button.
Select the "CD" display.
Pause and play
Press the Control knob.
Each time you press the knob, the audio pauses
or plays.
Eject the disc
1
Drop open the faceplate
Press the Release button.
2
Eject the disc
Press the [0] button.
3
Press the faceplate on the left side, and
return it to its former position.
M.RDM SRC
English
Control knob
19
|