Mount Your Receiver; Mount Your Receiver On The Wall - Philips SWW1810 Mode D'emploi

6 Mount your
receiver
You can either mount the receiver on the wall
or on the back of the HDTV.
Mount your receiver on the
wall
1
Select a spot near the HDTV.
2
Drill two holes in the wall. Make sure that
the distance between the two holes is
1 25 / " and the diameter of the hole is
32
3 / ".
16
3
Punch the supplied two anchors into the
two holes on the wall.
4
Put the two screws into the anchors and
1
leave / " to mount the receiver on.
8
5
Hook the key holes at the back of the
receiver on the screws.
EN 13