Before You Start - Bimar TE.HC17RBN Mode D'emploi

personnel, who will check that the section of the wires in the socket is suitable for the appliance's
power rating. In general, we advise against using adaptors and/or extensions: if their use is
indispensable, they must comply with the safety laws in force and their current capacity (amperes)
must not be inferior to the maximum capacity of the appliance.
 Every time you use the device, check that it is in good condition and the electric cable is not
damaged: if in doubt please contact professionally qualified personnel.
 Make sure that the cable is correctly positioned, that it is not wound around the device or twisted
on itself or entangled in any manner.
 The device comes into direct contact with the skin therefore it must be perfectly clean: please refer
to the paragraph "Cleaning and Maintenance".
 The power socket must be easy to reach so the plug can be removed quickly in case of emergency.
 Do not use the appliance with a timer or a programmer or with a system that can switch on the
appliance automatically, to avoid risk of fire, since a fire risk exists if the heater is covered or
positioned incorrectly.
 Do not use the appliance if the adapter or its cord is damaged. The adapter is not repairable, it has
to be returned to the seller during guarantee period or thrown away when the guarantee has expired.
In that case it has to be replaced by an identical model.
 In the case of a breakdown or fault, switch off the appliance and have it checked by a
professionally qualified technician; repairs made by unqualified persons can be dangerous and
render void the warranty.
 Never use the appliance with its adapter outside and always place it in a dry environment.
 When you decide to throw away the appliance, make sure to remove the battery and to dispose of it
in an ecological manner. For more information contact your town authorities.
ATTENTION: BE CAREFUL NOT TO TOUCH THE ACCUMULATOR OR THE LEAKING
LIQUID.
CONNECTING

Check that the switch is in the "Off" position, connect the cable to the lower part of the
appliance or the support and plug in the other end to the power socket. The indicator led will
remain on whilst the razor is being charged.
 The hair clipper may warm up somewhat during recharging. This has no significance on the
unit's operation. Overcharging is impossible, place it in an aired area.
 To maintain the hair clipper 's full performance, it should always be stored on the charging base
after use.
PRESERVING THE RECHARGEABLE BATTERY
To maximise the capacity and life of the rechargeable battery, it should be fully charged for 16 hours
before the first use and then fully discharged by using. Then recharge to full capacity (6 hours). This
discharging/charging procedure should be done every six months.

BEFORE YOU START

 Make sure that your clipper is clean, properly oiled and in perfect working condition. Caution: if
the blade is not oiled correctly, the appliance will not work properly.
 Place a towel around the neck of the person whose hair is to be cut to prevent hair from falling
inside the collar.
 Have the person sit on a chair so that his/her head is at your eye's level.
 Comb the hair thoroughly and hold the clipper in a relaxed, comfortable grip. This will help you
maintain an accurate cutting control.
10/28