Setting Angle Of Airflow - Qlima SC 54 Série Manuel D'utilisation

The Active clean operation is used to produce more condensed water to improve the
cleaning effect, and the cold air will blow out. After cleaning, the internal wind wheel then
keeps operating with hot air to blow-dry the evaporator, this keeping the inside clean.
-- When this function is turned on, the indoor unit display window appears "CL" , after 20 to
130 minutes, the unit will turn off automatically and cancel Active Clean function.
-- For some units, the system will start hightemperature cleaning process, and the temperature
of air outlet is very high. Please keep away from it. And this would lead to the rising of the
room temperature .
• Breeze Away (some units)
This feature avoids direct air flow blowing on the body and make you feel indulging in silky coolness.
• Refrigerant Leakage Detection (some units)
The indoor unit will automatically display "ELOC "or flash LEDS (model dependent ) when it detects
refrigerant leakage.
• Sleep Operation
The SLEEP function is used to decrease energy use while you sleep (and don't need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
And the Sleep function is not available in FAN or DRY mode.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the unit will
increase the temperature by 1 °c (2° F) after 1 hour, and will increase an additional 1 °c (2° F) after
another hour. When in HEAT mode, the unit will decrease the temperature by 1 °C (2° F) after
1 hour, and will decrease an additional 1 °c (2° F) after another hour.
The sleep feature will stop after 8 hours and the system will keep running with final situation.
Cool mode(+ 1°C/2°F) per hour
for the first two hours
Set
temperature
Heat mode ( -1°C/2°F) per hour
for the first two hours
NOTE: For multi-split air condtioners, the following functions are not available: Active clean
function, Silence feature, Breeze away function, Refrigerant leakage detection function and
Eco feature.
Setting Angle of Air Flow
Setting vertical angle of air flow
While the unit is on, use the SWING/DIRECT button on remote control to set the direction (vertical angle) of
airflow. Please refer to the Remote (ontrol Manual for details.
4
108
SLEEP operation
1hr 1hr
Saving energy during sleep
Keep
running