Bestron D1800SP Mode D'emploi page 27

user's instructions
Accessoiries
This vacuum cleaner is supplied with one combined accessory:
• a crevice tool with a narrow nozzle, which you can use to clean radiators, window
frames, crevices, small openings, and similar.
• a dusting brush, which you can use to clean delicate or irregular surfaces, furniture,
Venetian blinds, and similar.
oPArAtion - storage after use
1. Remove the plug from the wall socket.
2. Press the rewind button and keep it pressed in; the power cord will automatically rewind onto the reel.
Figure 8 Rewinding the power cord
Guide the power cord whilst it rewinds onto the reel, since otherwise the cord could become tangled or
the plug could strike the back of the appliance. Take hold of the power cord near the mark, and allow it
to gently slide through your fingers back into the appliance, see Figure 8.
3. An attachment slot for the combi nozzle is fitted to the back and underside of the vacuum cleaner (see
Figure 9). Slide the bottom of the combi nozzle into the slot. This avoids the need to dismantle the
vacuum cleaner after use; you can store the assembled appliance and retrieve it again quickly when
you need it.
Figure 9 Storing the vacuum cleaner
cleAninG And MAintenAnce - cleaning the housing
1. Remove the plug from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
3. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
27
Figure 7