JVC KD-R981BT Manuel D'instructions page 20

BLUETOOTH®
Bluetooth mode settings
1 Press and hold .
2 KD-R981BT/KD-R784BT/KD-R782BT: Turn the volume knob to select an item
KD-R889BT/KD-R881BT:
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
BT MODE
PHONE SELECT* Selects the phone or audio device to connect or disconnect.
" " appears in front of the device name when connected.
AUDIO SELECT*
" " appears in front of the current playback audio device.
DEVICE DELETE KD-R981BT/KD-R784BT/KD-R782BT:
1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
KD-R889BT/KD-R881BT:
1 Press
2 Press
PIN CODE EDIT Changes the PIN code (up to 6 digits).
1 Turn the volume knob (for KD-R981BT/KD-R784BT/KD-R782BT) or press
(0000)
2 Press
Repeat steps
3 Press the volume knob (for KD-R981BT/KD-R784BT/KD-R782BT) or
RECONNECT ON: The unit automatically reconnect when the last connected Bluetooth
device is within range. ; OFF: Cancels.
16
ENGLISH
(see the following table), then press the
knob.
Press to select an item (see the
following table), then press
.
to select a device to delete, then press
to select [YES] or [NO], then press
(for KD-R889BT/KD-R881BT) to select a number.
to move the entry position.
1 2
and until you finish entering the PIN code.
(for KD-R889BT/KD-R881BT) to confirm.
AUTO PAIRING
INITIALIZE
.
INFORMATION
* You can only connect a maximum of two Bluetooth phones and one Bluetooth audio
device at any time.
Default: XX
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between
the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
"BLUETOOTH"
USING PHONE"
2
Search and select "KD-R9
.
on the Bluetooth device within 3 minutes.
.
3
Perform (A), (B) or (C) depending on what appears on the
display.
(A) "PAIRING"
same passkey appears on the unit and Bluetooth device, then
operate the Bluetooth device to confirm the passkey.
(B) "PAIRING"
device.
(C) "PAIRING": Operate the Bluetooth device to confirm pairing.
ON: The unit automatically pair supported Bluetooth device
(iPhone/iPod touch/Android device) when it is connected
through USB input terminal. Depending on the operating
system of the connected device, this function may not work. ;
OFF: Cancels.
YES: Initializes all the Bluetooth settings (including stored
pairing, phonebook, and etc.). ; NO: Cancels.
MY BT NAME: Displays the unit name ("KD-R9
"KD-R8 BT"/"KD-R7 BT"). ;
MY ADDRESS: Shows address of this unit.
.
"CHECK MODE" appears. "SEARCH NOW
"PIN IS 0000" scrolls on the display.
BT"/"KD-R8 BT"/"KD-R7
"XXXXXX" (6-digit passkey): Ensure that the
"PIN IS 0000": Enter "0000" on the Bluetooth
BT"/
BT"