Swing Setting; Using The Timer Function; Maintenance During Use - ZIBRO CLIMA TIN-327W Manuel D'utilisation

G
H
b
a
I
4
52

SWING SETTING

When using the SWING setting, the direction of the horizontal blade is varied
constantly. This promotes even distribution of the air in the room.
• The direction of the air flow can not be changed when the ventilator speed is
set to AUTO.
• The SWING setting is automatically deactivated when a function is changed.
• The SWING setting can not be used when the Timer is set.

USING THE TIMER FUNCTION

Use the Timer to switch the air conditioner on and off automatically at pre-set
times. Setting the Timer requires the correct time to be set and the air conditioner
to be switched on. Follow these steps:
1 Check that the correct time has been set.
Press the timer ON or OFF button to select the Timer function. The set time is
2
displayed.
Set the correct time with the
3
displayed. After approximately 1 minute, these symbols will disappear and it
will no longer be possible to reset the time.
This pre-programmed activation and deactivation can be used in combination.
The and symbols indicate the sequence.
The time must be reset if the power supply is disrupted during the setting
procedure.
OFF timer button
The air conditioner switches off automatically at the set time.
ON timer button
The air conditioner switches on automatically at the set time.

MAINTENANCE DURING USE

The air conditioner must be cleaned regularly. Follow these steps:
Switch the air conditioner off and pull the plug out of the socket.
1
Clean the interior unit and the remote control with a soft, dry cloth. You can
2
use a slightly damp cloth if the unit is extremely dirty.
Clean the air filter regularly.
3
If the interior unit is placed on the roof, the immediate vicinity of the unit
4
must be cleaned regularly in order to prevent dirt from blocking the heat
exchanger.
and buttons and the symbol a or b will be