ZIBRO CLIMA TIN-327W Manuel D'utilisation page 49

The last function used will be selected automatically if the airconditioner is
switched on after being switched off for less than 2 hours.
If you are not satisfied with the function selected automatically, switch to manual
control with the aid of the remote control.
MANUAL CONTROL FUNCTION
Press the ON/OFF button.
1
Select the desired function by pressing the function selection button. The
2
function selected will change each time the button is pressed: AUTO >
COOLING > DEHUMIDIFY > HEAT > VENTILATE.
3 Select the ventilator speed (see chapter F).
Adjust the direction of air flow (see chapter F).
4
You can set the desired temperature if you are using the cooling or heat
5
functions (see chapter E).
If the remote control does not work, the air conditioner can be operated
manually. In this case, you can select either the cooling or heating functions or
switch the air conditioner off. Each press of the button 'manual operation'
changes the function.
Details:
Set temperature
Ventilator speed
TIPS!
- The cooling function works optimally when the room to be cooled is exposed
to sunlight as little as possible.
- Protect the exterior unit against direct sunlight. This saves energy.
- We recommend keeping the difference between the exterior and interior
temperatures as small as possible. A temperature setting between 20°C and
24° C is most suitable. This will create a comfortable temperature.
- Excessive humidity causes discomfort. A relative humidity of approximately
55% is experienced as most comfortable.
Cooling
24 °C
medium
Heating
24 °C
medium
4
49