Operating The Airconditioner - ZIBRO CLIMA TIN-327W Manuel D'utilisation

REMOTE CONTROL
1
2
3
4
5
6
7
REMARKS
-
-
-
-
-
D

OPERATING THE AIRCONDITIONER

AUTOMATIC CONTROL FUNCTION
1
When activated, the airconditioner will first measure the room temperature,
which will be the basis for the automatic selection of
"DEHUMIDIFY' or 'HEAT'.
4
48
Remove the covering panel from the back and insert the batteries. Ensure
that the + and – poles correspond.
Press the 'CLOCK' adjustment button.
Set the correct hours with the
Press the 'CLOCK' adjustment button.
Set the correct minutes with the
Press the 'CLOCK' adjustment button again and close the covering panel.
The display will now show the correct time.
If the remote control will not be used for an extended period of time,
remove the batteries and store them in a dry location.
The distance for signal reception is approximately 6 metres. One or two beeps
will be heard when the unit has received the signal.
To ensure that the signal transmission section of the remote control functions
optimally, point it at the signal reception section of the unit.
Do not use rechargeable batteries
Careless use and moisture can damage the remote control.
Press the ON/OFF button.
Room temperature on activation
approx. 25 °C or higher
approx. 20 -25 ° C
approx. 20 °C or lower
and buttons.
and buttons.
Automatic function selection
COOLING
DEHUMIDIFY
HEAT
either 'COOLING',