Multi-Sequence Cooking - Waves MW-104384 Mode D'emploi

Shield the edges with foil strips. Place joint with lean side face upwards (if possible) on a shallow dish. When
the oven Beeps, it is to prompt you to turn over the food. Turn over, and shield the defrosted portions. Press
Instant. Start button to continue defrosting. After defrost time, stand covered with microwave foil for 10‐30
minutes.
Poultry:
Remove from original wrapper. Shield wing and leg tips with foil.
Place breast side down on a shallow dish. When the oven Beeps, it is to prompt you to turn over the food. Turn
over and shield the defrosted portions. Press Instant. Start button to continue defrosting. After defrost time,
stand covered with aluminum foil for 15‐30 minutes.
Note: After standing run under cold water to remove giblets if necessary.
Chicken pieces (chicken wings and drumstick)
Shield the exposed bone with foil. Place chicken pieces on a shallow dish. When the oven beeps, it is to prompt
you to turn over the food. Turn over, rearrange and shield the defrosted portions. Press Instant/ Start button to
continue defrosting. After defrost time, stand covered with aluminum foil for 5‐30 minutes.
AUTOMATIC STARTING AND SETTING THE CURRENT TIME
If you do not want the menu be started immediately, you can preset the cooking menu and time, and the preset
menu will be automatically started at your set time. The setting will consist of 2 steps: 1. Setting the current
clock; 2. Setting the cooking menu and time.
EXAMPLE HOW TO SET THE CURRENT TIME AND AUTOMATIC START
Set the current time:
1. Press the Clock button.
2. Set the hours by pressing the Defrost (+) button.
3. Confirm your setting by pressing the Clock button. Or you might wait five seconds.
4. Now do the same to set the minutes.
Set the automatic start:
1. Set the cooking menu and time.
2. Select cooking power by pressing the Micro Power button.
3. Press the Defrost (+) button to set the cooking time.
4. Press and hold the Clock button for three seconds to return to the current clock.
5. Set the required start time. Repeat the steps 2, 3 and 4 of the section "Set the current time".
6. Press Clock to confirm the automatic start. The program has now been activated.
7. The starting time can be checked by pressing the Clock button.
MULTI‐SEQUENCE COOKING
To obtain best cooking result, some recipes call for different cook mode and time. You may program your
personalized menu as follow: