Installation And Charging Of The Battery Pack - Olympia OL2420 Mode D'emploi

3 Installation and Charging of the Battery Pack

1) Open the battery compartment by sliding the cover
down.
2) Plug the Battery Pack connector into the Handset battery
socket. Place the battery pack and wires in the
compartment.
3) Close the battery compartment.
4) Mount the belt clip and one of the provided face panels
on the Handset.
5) Place the Handset (with battery pack plugged in) into the
Base cradle only for registration and charging for 10
hours so that the battery pack is fully charged. The
CHARGE indicator on the Base glows when the Handset
is charging. If the battery pack has sufficient voltage,
registration will take place automatically.
14