Names And Functions Of Parts (Main Unit) - Esoteric Grandioso K1 Mode D'emploi

Names and functions of parts (main unit)

A
POWER button
Press to turn the unit on and off .
When the unit is on, the power indicator (ring around the but-
ton) lights blue .
When the unit is off, it is unlit .
When not using the unit, turn it off .
B
CLOCK indicator
This shows the clock synchronization status .
The indicator blinks when a signal is input through the CLOCK
SYNC IN connector, and it lights when the unit is locked to the
signal .
C
MODE button
Press when stopped to select disc playback or an external input
as the source . When set to external input, the unit can be used
as a D/A converter (page 23) .
Press and hold for 2 or more seconds to change to setting mode
(page 24) .
D
Remote control signal receiver
This receives signals from the remote control . When using the
remote control, point the end of it toward this receiver panel
(page 13) .
E
Disc tray
Load a disc for playback here (page 16) .
14
A B C D E F
G
F
Display
This shows playback time, track number and other information
(page 21) .
G
Tray open/close (-) button
Press to open and close the disc tray .
H
Stop (8) button
Press to stop playback (page 17) .
When stopped, press and hold for at least two seconds to
change the playback area of a Super Audio CD (page 17) .
Press when in setting mode to complete changing settings and
show the ordinary display (page 24) .
I
Play (7) button
Press to start disc playback (page 16) .
During playback, the indicator near this button lights .
J
Pause (9) button
Press to pause playback (page 17) .
When paused, the indicator near the play button blinks .
K
Skip (.//) buttons
Use to skip to the previous or next track .
Press and hold for at least one second during playback to search
forward/backward . Repeatedly press and hold for more than one
second to change the forward/backward search speed to one of
three levels (page 18) .
Use to change parameters when in setting mode (page 24) .
H I J K