Components; Correct Use; General Safety Instructions For Handling Power Tools - MeisterCraft MPS 800 EL Traduction Du Manuel D'utilisation Original

5453380-Pendelhub-man 06.02.14 07:48 Seite 31
Noise/vibration information
Measured values determined in
accordance with EN 60745-1,
EN 60745-2-11.
The specified vibration emission value
was measured in accordance with a
standardised test procedure and can be
used in order to compare one electrical
tool with another.
The specified vibration emission value
can also be used for preliminary
evaluation of the disturbance.
CAUTION! The vibration emission
value may fluctuate from the
specified value during use of the
electrical tool. These fluctuations will
depend on the way in which the tool is
used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the
disturbance must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the tool is switched off and
times in which it is switched on, but is
running without load.)
3 – Components
1 On/Off switch
2 Stroke rate pre-selection
3 Locking button
4 Pendulum
5 Connection cable
6 Cut protection element
7 Connection for the dust extraction/
vacuum adapter
8 Cutting angle setting
9 Guide roll
10 Saw shoe
11 Parallel stopper
12 Adjustment wrench
13 Laser optic
14 On/Off switch for laser
4 – Correct use
Subject to the specified cutting rates
and when appropriate accessories are
used (Heed manufacturer's data), this
jigsaw is suitable for sawing wood,
metal, ceramics and panels of plastic or
mineral fibre. All other applications are
expressly ruled out.
The machine is intended only for use in
the household.
5 – General safety
instructions for handling
power tools
WARNING! Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated
(cordless) power tool.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
the appropriate knowledge, unless they
are supervised by someone who is
31