Important Safety Instructions - Hamilton Beach Commercial HIR400 Manuel D'utilisation

IMPORTANT SAFETY
When using your flatiron, basic safety precautions should be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
1. Only use an iron for its intended use.
2. To avoid the risk of electric shock, do not immerse the iron in
water or other liquids.
3. Always turn the iron to OFF (O) before plugging or unplugging
the iron from the electrical outlet. Never pull on the cord to
disconnect the iron from the electrical outlet; instead, grasp
the plug and pull on the plug to disconnect the iron.
4. Do not let the cord touch hot surfaces. Let the iron cool
completely before putting the iron away. Loop cord loosely
around iron when storing.
5. Always disconnect the iron from the electrical outlet before
filling the iron with water, emptying the water from the iron,
and when the iron is not in use.
6. Do not operate the iron with a damaged cord or in the event
the iron has been dropped or damaged or there are visible
signs of damage or it is leaking. To avoid the risk of electric
shock, do not disassemble the iron. Take it to a qualified
serviceman for examination and repair. Incorrect assembly
might result in a risk of electric shock when the iron is used
after reassembly.
7. The iron must be used and rested on a stable surface.
8. When placing the iron on its stand, ensure that the surface on
which the stand is placed is stable.
9. Close supervision is required for any appliance used by or
near children. Do not leave the iron unattended while the iron
is connected or on an ironing board.
840159101 EN v02.indd 2 840159101 EN v02.indd 2
INSTRUCTIONS
2
11/28/12 2:54 PM 11/28/12 2:54 PM