MC Crypt MP-5000 Notice D'emploi page 25

Installation/Setup
Use as table device
• Place the power amplifier on a straight, horizontal surface.
• The setup surface must not be sensitive to heat.
Use in a rack
• We recommend using a rack that can be opened from both sides, because it permits for easier installation and
connection.
• The power amplifier's front plate has four attachment holes. Attach the device in the rack with four sufficiently
large screws.
• Attachment at the front plate alone, however, is not sufficient for secure attachment. Additionally, even
attachment must be provided for by side and bottom rails. The respective rack producers offer different options
for this.
25