Technical Data; Box Contents - Greencut TDC600C Manuel D'utilisation

TECHNICAL DATA

Nominal input voltage
Nominal power
Mode of operation
Speed levels
Drill Chuck Size
Clamping chuck
Turning (turning radius)
Drilling depth
Column diameter
Height
Sound power level
Weight
NOTE: GREENCUT reserves the right to modify the technical data without prior notice.

BOX CONTENTS

1. Column drill (1 pc.)
2. Hexagon key S4*63 1PC (1 pc.)
3. Hexagonal screw M8*25 (3 pcs.)
4. Column clamp M10*35 (1 pc.)
5. Crank (3 pcs.)
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
COLUMN DRILL
240V ~ 50 Hz
600W
S2 15 min.
5 (550 / 950 / 1450 / 1950 / 1950 / 2500rpm)
Ø 1,5 - 13 mm
JT33
100 mm
50 mm
46mm
580 mm
Without load: 79.4dB / With load: 82dB
14 Kg
53
EN