Speed Control; How It Works - Honeywell HY-200 Série Guide D'utilisation

FAN OPERATION
1. Remove the fan from the plastic bag and carton.
2. Place the fan on a dry level surface.
3. Plug the fan into a 120 volt outlet.
On/Off
To turn fan on, turn the fan Speed Control Knob
located on the bottom of the control panel
clockwise.

Speed Control

Turn the fan Speed Control Knob clockwise to
set the Fan at High( ) or Low ( )
Oscillation
To activate the Oscillation feature, press the
Oscillation button ( ) once.
Press the Oscillation button again to turn the
Oscillation feature off.
See the next two pages for instructions on installing the Febreze

HOW IT WORKS

Once a Febreze Set&Refresh
®
scent cartridge has been inserted,
fresh Febreze scent is released
®
into the Scent Path and travels to
the interior region of the fan.
At this point, the fresh Febreze
scent combines with the air being
drawn into the fan by the fan motor.
The fan then pushes a stream of
Febreze scented air out through
®
the front fan grilles to cool and
freshen your entire room.
The Scent Control Dial allows you to
control the level of scent output.
To operate the fan without scent,
simply remove the Febreze
Set&Refresh scent cartridge.
®
®
®
®
- 3 -
Set&Refresh
®
Set&Refresh ®
Scent Cartridge
Scent Path
Freshened Air Out
Freshened Air Out
Scent
Control
Dial
Scent
Cartridge
Compartment
Oscillation
Button
On/Off
& Speed
Control
scent cartridge.
®
Air In
Air In