brennenstuhl 1507450 Manuel D'utilisation page 20

Assigning a socket switch to a control key
1. Set a frequency of a control key on the remote control using
DIP switches 6 to 9 (14):
3
DIP switch 10 is not occupied.
Control key
A
B
C
D
2.
Push the cover in (13) and close.
3. Insert the screw (16) through the screw hole (12) into the
thread (15) and tighten.
Example
Set the radio channel '123' on the remote control.
Set the radio channel '123' on all the socket switches. Set a
control key frequency as well. In the fi gure the key pair 'A' is set
with DIP switch 6.
20
DIP switch
6 7
ON OFF
OFF ON
OFF OFF
OFF OFF
8 9
OFF OFF
OFF OFF
ON OFF
OFF ON
10
OFF
OFF
OFF
OFF