Technical Specifications; Warranty Conditions - BST UDR 66 Manuel D'utilisation

UDR 66

TECHNICAL SPECIFICATIONS

General :
Frequency range:
Dynamic range:
Frequencyresponse:
Operating range :
Receiver :
Sensitivity :
Output audio level:
Power supply :
Battrey life :
Dimensions :
Weight :
Transmitter:
Input impedance:
Input connector :
Gain control range:
Max input level:
Power supply :
Dimensions :
Weight :

WARRANTY CONDITIONS

BST equipment is covered by a 2-year warranty on parts and labour except for battery.
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BST are allowed to work on the equipment. Warranty becomes void when other service technicians open the
equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BST will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
© Copyright LOTRONIC 2012
Select a Group and/or Channel:
Press SET button, while GROUP isflashing, pressing DOWN or UP buttons to select a fit
group，asshown(5). Thenpress SET buttonagain, while CHANNEL isflashing, pressing DOWN or UP
buttonsto
select a fit channel, as shown(6).
BatteryStatus:
Five levelbatterystatus in receiver, as shown(7).
Stereo/Mono Working Mode Display:
Whenreceiverreceivesstereo signal STEREO sign lights or MONO sign lights by automatic, as shown(8).
Full Display:
Displays batterystatus, RF/audio level, stereo/mono workingmode and workingfrequencies, as shown(9).
UHF ( 740 – 770MHz )
>90dB
60Hz-16KHz
50-70m
94dBm
100mW
2x battery 1,5V AA
About 5 hours
95x65x25mm
100g
100KOhms
2x XLR
40dB
+6dBV
12-18V DC at 300 mA
212x38x96mm
605g
WWW.BSTDJ.COM
Page 11