BST UDR 66 Manuel D'utilisation page 10

UDR 66
OPERATING OF RECEIVER
© Copyright LOTRONIC 2012
Select a Group and/or Channel:
Press SET button, while GROUP isflashing, pressing DOWN or UP buttons to select a fit group, as
shown(1). Thenpress SET buttonagain, while CHANNEL isflashing, pressing DOWN or UP buttons to
select a fit channel, as shown(2).
Note: whenusing multiple system, set all transmitters to the samefrequency group for best results, then
setup a specialchannel for eachtransmitter in the group.
Audio Input Level Display:
Displays left and right track audio input level, as shown (3) .
Full Display:
Displays left and right track audio input level and transmitterworkingfrequencies, as shown(4).
Adjusting audio input levelbutton to let transmittervolumein a fit status.
WWW.BSTDJ.COM
Page 10