La Pavoni PCN Mode D'emploi page 54

English
Coffee is pro-
duced without
froth
Coffee too cold
Coffee is too hot
The machine
does not produce
steam
– ALARMS/
MALFUNCTIONS
The switch you
are using blinks
BUONDI_PUCCINO_2010.indd 52
1. Coffee not suitable for machine
2. Improper grind
3. Too little coffee in filter
1. The machine had not reached the
proper temperature
2. Filter-holder not preheated
3. Cups not preheated
4. Pressure switch malfunction.
1. Pressure switch malfunction.
1. The lines are not primed
2. Obstructed outlet hole at end of
steam pipe
3. Too little water in tank
4. Turbo steam nozzle improperly posi-
tioned
1. Empty water tank. Lack of water.
Pump noise.
2. Grinding is too fine
3. Dirty filter
4. Coffee is too pressed
1. Use different coffee
2. Adjust coffee grind
3. Put more coffee in the filter
1. See section 11.1 – 11.2
2. Filter-holder must be heated together
with the water – see section 11.1
3. Properly heat the cups
4. Contact the nearest SERVICE CENTER
1. Contact the nearest SERVICE CENTER
1. See section 11.4 – steam production
2. Clean the outlet hole with a needle
3. See section 11.1
4. Reposition turbo steam nozzle
1. Fill in the water tank with water and
repeat the procedures to fill the boiler
with water.
2. Modify the grinding
3. Clean the brewing group filter
4. Do not press the coffee too much
52
15/01/10 15.39