EdilKamin LX-GSM-01 Manuel D'utilisation page 73

7.2 User registration in the dialler SIM contact list
The first operation that must be carried out, essential for using the LX-GSM-01 dialler, is the re-
gistration of the mobile/smartphone number that you intend to use in the dialler SIM.
This registration takes place by means of password authentication. The password, which CAN-
NOT be modified, corresponds to the last 5 numbers of the IMEI number printed on the label
located beside the SIM (see sample image below).
Sample SMS text message for registration on contact list: 11SALVA79855
CONTACT LIST POSITION
11
If the registration is successful the LX-GSM-01 will reply with a confirmation SMS text message:
A maximum of 8 users can be registered in storage positions 11-12-13-14-15-16-17-18
IMPORTANT: For each user added re-enter the password.Registration by the main user should be
7.3 Deleting a user from the dialler SIM contact list
Sample SMS text message for deletion from contact list: 11CANCELLA79855
CONTACT LIST POSITION
11
If the deletion is successful the LX-GSM-01 will reply with a confirmation SMS text message:
IMPORTANT: if you are using the LX-GSM-01 dialler with a single user, leave position 11 active.
Figure 5: IMEI code label
COMMAND
SAVE
USER SAVED pos = 11
carried out at position 11.
COMMAND
DELETE
USER DELETED pos = 11
- 73
-
PASSWORD
79855
PASSWORD
79855