Frequently Asked Questions / Troubleshooting - VITO PRO-POWER VIASC18A Mode D'emploi

EN

FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING

Question /Problem
The vacuum cleaner will not turn on:
� Non-existent supply voltage;
� The safety switch is not pressed;
Reduction of suction power:
� The HEPA filter is dirty;
� The HEPA filter is completely clogged;
28
Solution
� Check the power cable, plug, outlet and protective circuit
breaker;
� Install and tighten the HEPA filter;
� Press the dust shaking switch;
� Clean the filter according to the maintenance instructions;