Care And Maintenance - Reely Lama 5.1 Notice D'emploi



13. Care and maintenance

Clean the exterior of the model and the remote control only with a soft, dry cloth or brush. Never use aggressive
cleansing agents or chemical solutions, because they might damage the surface of the housing.
• Check the mechanical parts of the model throughout at
regular intervals. All screwed connections should be tight
and should not loosen up due to vibrations of the
helicopter.
• Make sure that the grub screws in the top set collar (1)
and the bottom set collar (2) of the main rotor shaft have
a tight fit.
• Rotatable parts must turn easily but there must not be
any play in the bearings.
• When replacing mechanical parts use only original
spares available from the manufacturer.
The spare part list can be found on our website in the Download domain specific to the corresponding
product.
You can also order the replacement parts list by phone. For the contact data, please refer to the top of
these instructions in the chapter "Introduction".
56
Figure 16