tuctuc COMFORT BABY CARRIER Mode D'emploi page 10

The second is a reinforcement that can be folded away if not needed. It also has a
compartment with a hood to protect from the wind, sun or other elements. It can be
adjusted with a click system located in the strap area.
DIFFERENT MODES OF USAGE
1. For babies weighing less than 9 kg. Use of the reducer (in front)
2. For babies weighing more than 9 kg (in front)
3. For babies weighing more than 9 kg (back)
4. For older babies
1. For babies weighing less than 9 kg (front face in position)
- Place and spread out the baby carrier on your knees. Fasten the abdominal belt.
- Unfold the seat size reducer and place the baby very close to you.
-Buckle the reducer using the front fasteners so the baby is attached more securely to the
carrier. Use the most suitable button for the minimum opening size for the legs.
- Do up the buttons, release the baby's head and bring it up to your trunk. Now lift the
baby with care and insert one arm through one of the straps, while holding the child with
your other hand.
- Now change hands and fit the second strap. Fasten the linking buckle at the back, so
that the straps cannot slide over the shoulders.
- Ensure that the baby's legs come out of the sides of the baby carrier.
- Use the safety straps to adjust the belts to your body and the baby's body.
10
Placement of the baby's legs
When the baby is very small, its legs should be folded
inside the baby carrier.
When the baby is older, its legs should be hanging and
never between the abdominal belt and your body.
Adjustable head support
This baby carrier has a double system of head support
adjustment. The first one is an adaptive cushion that can be
raised or lowered with a Velcro system as the child grows and
removed when the child is able to hold its own head securely.