Bticino HC4606 Mode D'emploi page 8

Operation in BURGLAR ALARM mode
When used with the unit item 3500/N/GSM - by pressing 'o¬' and then the 5 digits of the user code stored in the unit, it will be
possible to enable and disable the system.
When used with the flush-mounting unit (item L/N/NT4600), program the code in the burglar alarm unit first.
This operation is necessary in order for the keyboard to work as a connector of the system:
�������������� ����
1. Set the unit to maintenance mode using the switch on the back (OFF position);
2. Press the P key and check if the yellow Led lights up (PROG);
���� ����������
3. First, program the remote controls (see REMOTE CONTROL PROGRAMMING in the burglar alarm installation
manuals);
�
4. Enter 'o¬' + your 5-digit code;
5. Make sure you hear a long tone from the keyboard and a short one from the unit;
6. Repeat 4 and 5 if you want to store more codes or more keyboards with different codes;
7. When you have finished programming the last code, press the S button on the unit (the yellow PROG Led goes off)
and flip the selector switch of the unit back to ON;
8. Send an pulse with the IR remote control;
9. Switch ON and OFF.
The unit can store up to 30 codes to switch the system On/Off.
�
BUZZER deactivation when keys are pressed
It is possible to activate / deactivate the "key pressure signaling" buzzer with the following procedure:
press key 1 for 5 seconds until you get two beeps and two quick flashes from the connector.
Repeat the procedure to reset the buzzer.
Anti-burglary alarm management
When the system is enabled, the keyboard sends a silent alarm after the system has been deactivated with the following
procedure:
press 'o¬', 'P' and the user code sequentially.
BUZZER and LED management
��������� �������
�������� ������
�
���� ��������� �� ���������
���� ��������� �� ������
���� ��������� �� �����
������
����������������������
��������������
����������������
���������������������
�����������������
��������������
������������������
������������������
��������������������������
Event
������ ��
���� �����
������ �������
������ ��������
����� �����
������� �����
�� ����� �����
�
���������
������
������ �������������������������
��������������
������
���������������
������
������
LED Green
��������
�
���
��
�������� ����
���
������
���������
������
������
������������������������
������
���������������
���������������
Led Red Buzzer
�
�������
� �������
�
���
�
���
�� �������
�
��
�
��