Customizing The Power Button; Resyncing Your Cable/Satellite Box And Tv; Switching Between Sources - Bose RC-PWSII Notice D'utilisation

Customizing the power button

You can customize the power button
to power on/off your system, TV and cable/satellite box
simultaneously.
1. Program your remote to control your TV and cable/satellite
box (see page 4).
2.
Press and simultaneously and hold for ten
seconds.
Both buttons flash three times.

Resyncing your cable/satellite box and TV

After customizing the power button, your cable/satellite box and
TV may become out of sync and not power on/off simultaneously.
Use the following steps to resync your system.
1.
Press the source button for the device that is out of sync.
2.
Press to power on or off the source.
3.
Press .
Your devices power on or off simultaneously.
Universal Remote Control Programming Guide

Switching between sources

on your remote You can switch from one source to another by pressing
the appropriate source button on the remote. In addition to
controlling the selected source, the remote always controls the
basic speaker functions (on/off, volume, mute) of your system.
Note: Before you begin, ensure you have correctly programmed
your sources.
1.
2.
3.
You may need to press
input for the source.
On some TVs,
to choose the correct TV input and close this menu.
Press the button for the source you want to control.
The source button glows.
Press .
The source powers on.
Press to select the correct input on your TV.
several times to select the TV
displays a menu. Use your system remote
5