Toto CST442 Manuel D'installation page 7

10. No ballcock / fill valve adjustments are
needed. The water will automatically stop
at proper level. Flush the toilet several
times. Check the valve for proper opera-
tion. Make sure that chain is not tangled
and that the flapper arm is in its proper
position.
11. Install the toilet tank lid onto the toilet
tank top.
12. When installing the washlet main unit
or standard toilet seat main unit, fol-
low the instructions on the Installation
Guide.
13. Once the installation is completed, pro-
ceed to verify the toilet unit for leaks.
INSTALLATION PROCEDURE
Toilet bowl
inner surface
Standard Seat
Connection
Washlet™ Seat
Connection
7
Toilet bowl
outer surface
Silicon sealant