Using The Mixing Bowl; How To Assemble / Disassemble Accessory - Robusta LE CHEF Manuel D'utilisation

EN

USING THE MIXING BOWL

1.Press down the Locking Bar to lift up the arm.
2.Place the mixing bowl into the housing and turn the bowl until it locks into place.
3.Inserting the Bowl Lid and then Kneading hook / Stirrer beater / Whisk into Accessories Outlet. Sure the
Accessory is inserted well.
4.Now fill in your ingredients through the Bowl Lid .
5.Press the Locking Bar down again and in the same time press down the arm to lock into body unit
6.Turn  Speeds Selector to start the machine and set the right speed.
7.After operation, turn the  Speeds Selector back to "0" position to stop machine. Then remove the mains
plug.
8.Press the Locking Bar down again to disassemble Kneading hook / Stirrer beater / Whisk , the Bowl Lid,
and then remove mixing bowl ,
9.The mixture can now be released with the help of a spatula and removed from the  the mixing bowl.
10.Clean the parts as described under "Cleaning"

HOW TO ASSEMBLE / DISASSEMBLE ACCESSORY

I) BOWL LID
A) Plug off before assemble / disassemble bowl lid
B) Press the button and rise up the arm
C) Assemble -- Insert the lid into the outlet of arm, turn right
D) Disassemble – Turn left the lid
E) Do not disassemble the lid as E picture.
II) KNEADING HOOK / STIRRER BEATER / WHISK
The Assembly or disassembly way as below:
III) BLENDER
Assembly the blender jar as Pic.6
Take off lid (Pic. 1)
Place the blender into Blender Outlet (Pic. 2),
Turn right the blender jar to lock the Jar
onto the Motor Unit (Pic. 3),
Disassembly the blender jar only after the motor is stopped
Turn left the blender jar to release blender from the Safe switch
Cover the lid into the Motor Unit (Pic. 3),
11