Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
24
Put the roof panel upon roof beams ( grey side up ), the top side of the wall panel
should be close to the top beam so one screw can be fixed, the panel should leave
10mm gap to the cover of front/ back out beams.
Then screw through the roof panel to the beams with roof fixing kits.
NOTE: Don't fix the last row of screws to the outer beams at the moment.
24
L
L
24
L + M
NOTE:
1. Fixing first 2 screws to the top beam without water-proof kits, make sure someone help holding the
.
panel until at least 2 screws are done.
2. Make sure the screws are installed through the wave crest, we need screw every two waves.
19
GARDEN
Publicité
Table des Matières
