Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Do not operate the garment steamer with a damaged cord, plug or if the steamer
has been dropped or damaged. To avoid risk of electric shock, do not disassemble
or attempt to repair the unit on your own. Return the unit to Reliable Corporation
(see warranty) for examination, repair or replacement.
PROBLEM
Steamer does not get
hot.
The unit is not
producing steam.
Unit produces little
steam
and cycles on/off.
The switch light does
not illuminate when the
switch is turned to the on
position.
Water drips from nozzle.
11
POSSIBLE CAUSES
1. Steam unit is not
plugged
in or turned on.
2. Automatic shut-off has
engaged. The water
bottle is empty and the
reservoir has drained.
1. Water level is too low.
2. Element may not be
functioning.
1. Unit is dirty and
requires cleaning.
2. The thermostat may be
defective.
1. Switch is not working.
2. Cord is not good.
3. Fuse wire is bad.
4. The outlet may not
have power.
1. Condensation has
formed inside the
steamer hose.
REMEDY
1. Plug the steamer in.
Turn it on.
2. Push the on/off switch
to the off position. Fill
the water bottle and
fit it in place. Turn on.
1. Push the on/off switch
to the off position.
Refill the water bottle
and fit it in place. Turn
on.
2. Replace heating
element.
1. Throw the old water
out
and flush the unit.
2. Replace thermostat.
1. Replace part.
2. Replace part.
3. Replace part.
4. Try plugging into a
different outlet.
1. Hold the hose upright
and allow to drain back
into the base of the
unit.
Publicité
