Installing The App - switel COIP200B Manuel De L'utilisateur

Installing the app

To operate the camera in conjunction with your smartphone, you need the app
WeHome-Mini Smart Home / WeHome, which you can download and install for free.
(Minimum requirements: Android from 5.0, iOS from 9.0)
Android
Connecting camera to app
Camera and smartphone must be in the same 2.4 GHz WLAN (5 GHz networks are not
supported).
Note: When using multiple cameras, each camera must be separately connected to the
app.
1. Start the app.
2. Tap the "+" to add a device.
3. Select the device type "A6 (AA battery)".
4. Make sure the camera is ready for use (batteries inserted) and check that a red LED
is flashing below the lens behind the screen.
5. Tap on "RED LED IS BLINKING".
6. Select the type of power supply and tap "OK".
7. Scan the QR code on the sticker
on the bottom of your camera.
8. Enter the Wi-Fi password and tap "CONNECT TO WI-FI".
9. Enter a password to access your camera and confirm it in the line below. Tap "NEXT".
10.The connection of the smartphone with the camera is done via acoustic signals, which
are sent from the smartphone. Make sure your smartphone and camera are in
close proximity to each other and that the playback volume of your
smartphone is set sufficiently high.
11. Enter a name for the camera for better identification and tap "SAVE".
12. You will see the list of devices connected to the app and you can select the live
image.
Notes: Any number of suitable devices can be connected to the app, as long as the
router or Internet line can transfer the data volume. We recommend to connect max.
4 cameras to prevent disconnections.
A camera can be connected to any number of apps, but only two people can access it
at the same time. One person can use the intercom function, the other can listen but
can not speak.
10
iOS
(illustration exemplary: )