Drill Safety Warnings; Additional Safety Instructions - Hilti SF BT 22­A Mode D'emploi Original

Masquer les pouces Voir aussi pour SF BT 22­A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Service
▶ Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
▶ Never service damaged battery packs. Service of battery packs should
only be performed by the manufacturer or authorized service providers.

2.2 Drill safety warnings

Safety instructions when using long drill bits
▶ Never operate at higher speed than the maximum speed rating of
the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate
freely without contacting the workpiece, resulting in personal injury.
▶ Always start drilling at low speed and with the bit tip in contact with
the workpiece. At higher speeds, the bit is likely to bend if allowed
to rotate freely without contacting the workpiece, resulting in personal
injury.
▶ Apply pressure only in direct line with the bit and do not apply
excessive pressure. Bits can bend causing breakage or loss of control,
resulting in personal injury.

2.3 Additional safety instructions

Personal safety
▶ Use the tool only when it is in technically faultless condition.
▶ Never tamper with or modify the tool in any way.
▶ Always hold the tool with the hand on the grip provided. Keep the grip
clean and dry.
▶ Avoid touching rotating parts – risk of injury!
▶ Wear suitable protective glasses, a hard hat, ear protection, protective
gloves and light respiratory protection while using the power tool.
▶ Wear protective gloves also when changing the accessory tool. Touching
the accessory tool presents a risk of injury (cuts or burns).
▶ Wear eye protection. Flying fragments present a risk of injury to the body
and eyes.
▶ Take breaks between working and do physical exercises to improve
the blood circulation in your fingers. Exposure to vibration during long
periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
▶ Use a dust removal system and suitable vacuum cleaner whenever
possible. Dust from materials, such as paint containing lead, some kinds
of wood, concrete / masonry / stone containing silica, and minerals as
well as metal, may be injurious to health.
▶ Keep the power tool out of reach of children. The power tool is not
intended for use by inexperienced persons who have received no special
training.
6
English
2160456
*2160456*

Publicité

Table des Matières
loading

Table des Matières